rigid clamp coupling 4 aluminum jaw coupling-TIANNIU

Your location:Home Products Shaft coupling Jaw coupling.Plum coupling GFC Aluminum alloy plum type rigid clamp coupling jaw coupling

rigid clamp coupling 4 aluminum jaw coupling

//www.backstopclutch.com/uploadfiles/128.1.164.27/webid1824/source/202202/164585719594.jpg

GFC Aluminum alloy plum type rigid clamp coupling jaw coupling

>Zero rotation clearance, suitable for forward and reverse rotation >The colloid is made of polyurethane and has good wear resistance >Oil resistance and electrical insulation, intermediate elastomer can absorb vibration >Compensation for radial, angular and axial deviations >Detachable design, easy to install >Fastening method of set screw

Inquire Now

GFC Aluminum alloy plum type rigid clamp coupling jaw coupling

Inquire Now

Product Detail

Feature:

The GFC Aluminum alloy plum type rigid clamping shaft coupling is processed by turning, milling, broaching and other machining methods, and then the whole heat treatment. In order to ensure sufficient mechanical strength, there is also a claw disc casting on the market, which can be produced in large quantities and eliminates processing loss. So the price of our shaft coupling manufacturer is much lower than machining. But the performance of the casting is not very good. It's best not to use it in important situations. And the castings claw teeth in high speed or high load is easy to hit teeth (claw teeth fall off).

Product parameter:

model parameter	common bore diameter d1,d2	ΦD	L	LF	LP	F	M	tightening screw torque (N.M)
GFC-14X22	3,4,5,6,6.35	14	22	14.3	6.6	5.0	M2.5	1.0
GFC-20x25	3，4,5,6,6.35,7,8,9,9.525,10	20	25	16.7	8.6	5.9	M3	1.5
GFC-20X30	3,4,5,6,6.35,7,8,9,9.525,10	20	30	19.25	8.6	5.9	M3	1.5
GFC-25X30	4,5,6,6.35,7,8,9,9.525,10,11,12	25	30	20.82	11.6	8.5	M4	2.5
GFC-25X34	4,5,6,6.35,7,8,9,9.525,10,11,12	25	34	22.82	11.6	8.5	M4	2.5
GFC-30x35	5,6,6.35,7,8,9,10,11,12,12.7,14,15,16	30	35	23	11.5	10	M4	2.5
GFC-30X40	5,6,6.35,7,8,9,10,11,12,12.7,14,15,16	30	40	25	11.5	10	M4	2.5
GFC-40X50	6,8,9,10,11,12,12.7,14,15,16,17,18,19,20,22,24	40	50	32.1	14.5	14	M5	7
GFC-40X55	6,8,9,10,11,12,12.7,14,15,16,17,18,19,20,22,24	40	55	34.5	14.5	14	M5	7
GFC-40X66	6,8,910,11,12,12.7,14,15,16,17,18,19,20,22,24	40	66	40	14.5	14	M5	7
GFC-55X49	10,11,12,12.7,14,15,16,17,18,19,20,22,24,25,28,30,32	55	49	32	16.1	13.5	M6	12
GFC-55X78	8,10,12,12.7,14,15,16,17,18,19,20,22,24,25,28,30,32	55	78	46.4	16.1	19	M6	12
GFC-65X80	14,15,16,17,18,19,20,22,24,25,28,30,32,35,38,40	65	80	48.5	17.3	14	M8	20
GFC-65X90	14,15,16,17,18,19,20,22,24,25,28,30,32,35,38,40	65	90	53.5	17.3	22.5	M8	20
GFC-80X114	19,20,22,24,25,28,30,32,35,38,40,42,45	80	114	68	22.5	16	M8	20
GFC-95X126	19,20,22,24,25,28,30,32,35,38,40,42,45,50,55	95	126	74.5	24	18	M10	30

model parameter	Rated torque (N.M)*	allowable eccentricity (mm)*	allowable deflection angle (°)*	allowable axial deviation (mm)*	maximum speed rpm	static torsional stiffness (N.M/rad)	moment of inertia (Kg.M²)	Material of shaft sleeve	Material of shrapnel	surface treatment	weight （g）
GFC-14X22	5.0	0.1	1	±02	10000	50	1.0x10^-6	High strength aluminum alloy	Polyurethane imported from Germany	Anodizing treatment	10
GFC-20X25	5.0	0.1	1	±02	10000	50	1.0x10^-6				15
GFC-20X30	5.0	0.1	1	^02	10000	53	1.1x10^-6				19
GFC-25X30	10	0.1	1		10000	90	5.2X10^-6				33
GFC-25X34	10	0.1	1	£)2	10000	90	5.2x10^-6				42
GFC-30X35	12.5	0.1	1	±02	10000	123	6.2x10^-6				50
GFC-30x40	12.5	0.1	1	102	10000	123	6.2x10^-6				60
GFC-40X50	17	0.1	1		8000	1100	3.8x10^-5				115
GFC-40X55	17	0.1	1	±02	8000	1100	3.8x10^-5				127
GFC-40X66	17	0.1	1		7000	1140	3.9x10^-5				154
GFC-55X49	45	0.1	1	±02	6500	2350	1.6x10^-3				241
GFC-55X78	45	0.1	1	102	6000	2500	1.6x10^-3				341
GFC-65X80	108	0.1	1	±02	5500	4500	3.8x10^-3				433
GFC-65X90	108	0.1	1	±02	5500	4800	3.8x10^-3				583
GFC-80X114	145	0.1	1	£)2	4500	5000	1.8x10^-3				1650
GFC-95X126	250	0.1	1	±02	4000	5000	2.0x10^-3				1000