Teeth type multi-disc electromagnetic clutch and brake-TIANNIU

Your location:Home Products Electromagnetic clutch Teeth-type DLY0 Teeth type multi-disc electromagnetic clutch electromagnetic brake

DLY0 Teeth type multi-disc electromagnetic clutch electromagnetic brake

//www.backstopclutch.com/uploadfiles/128.1.164.27/webid1824/source/202106/162374672656.png

DLY0 Teeth type multi-disc electromagnetic clutch electromagnetic brake

The clutch one way bearing is mainly used in machinery driving system,and widely in metal processing machine,metallurgy,steel rolling machine,packing machine,medical machine,food processing machine textile and printing and dying machine,paper making machine,precision machine tool etc.

Inquire Now

DLY0 Teeth type multi-disc electromagnetic clutch electromagnetic brake

Inquire Now

Product Detail

Main use:

When the relative revolution of the driving and the driven of parts is lower or zero,the clucth makes them combination,thus realize the purpose of starting and stopping ,changing the directions and positioning etc.The clutch one way bearing is mainly used in machinery driving system,and widely in metal processing machine,metallurgy,steel rolling machine,packing machine,medical machine,food processing machine textile and printing and dying machine,paper making machine,precision machine tool etc.

Product Parameters:

Teeth type multi-disc electromagnetic clutch

SIZE	Radial Demensions										Axial Demensions
SIZE	D1	D2	D3	D	d	b	Φ	h	e	M	L	L1	L2	L3	L4	α	δ
DLY0-1.2	61	30	27.5	20	17	6	18	19.9	5	3-M4深8	36	19.2	7	3	6	30°	0.2
DLY0-2.5	73	35	34	25	22	6	25	27.6	8	3-M4深8	36	19.2	8	3	6	30°	0.3
DLY0-5	87	45	41	28	24	6	28	30.6	8	3-M4深8	44	24.2	8	5	8	30°	0.3
DLY0-10	94	45	50	40	35	10	40	42.9	12	3-M4深10	45	25.5	8	5	8	30°	0.5
DLY0-16	104	60	55	45	40	12	45	47.9	12	3-M5深10	50	29.2	8	5	8	30°	0.5
DLY0-25	125	75	70	50	45	12	50	53.8	14	3-M5深10	52.5	31	9	4	9	30°	0.5
DLY0-40	140	80	75	60	54	14	60	64	18	3-M6深10	62	35	10	3	10	60°	0.8

Mounting:

Teeth type multi-disc electromagnetic clutch

Installation:

1.The clutch can be installed either in horizontal or in verial,If it mounted no the alex,the coaxlal degree between the driving and the driven shaft should not exceed 0.05mm,and must ensure the work clearence value σ.

2.The teeth of both ends should be cleaned before mounting the clutch. 3.The driving and the driven parts of the clutch must be fixed in axial direction,its axial moving doesn't permitted.