Aluminum alloy parallel line clamping coupling-TIANNIU

Your location:Home Products Shaft coupling Parallel linear coupling GIC Aluminum alloy parallel line clamping coupling

Aluminum alloy parallel line clamping coupling

//www.backstopclutch.com/uploadfiles/128.1.164.27/webid1824/source/202202/164585603234.jpg

GIC Aluminum alloy parallel line clamping coupling

Now most of the parallel linear coupling is made of aluminum alloy, of course, there are also stainless steel elastic couplings. Aluminum alloy parallel liner coupling in addition to corrosion resistance, but also increased the torque bearing capacity and rigidity, and even can reach two times of similar products made of aluminum alloy.

Inquiry Now

GIC Aluminum alloy parallel line clamping coupling

Inquiry Now

Product Detail

Description:

Now most of the parallel linear coupling is made of aluminum alloy, of course, there are also stainless steel elastic couplings. Aluminum alloy parallel liner coupling in addition to corrosion resistance, but also increased the torque bearing capacity and rigidity, and even can reach two times of similar products made of aluminum alloy. However, this increase in torque and rigidity is partially offset by the increase in mass and inertia. Sometimes the negatives outweigh the benefits, forcing users to find other forms of coupling.

model parameter	common bore diameter d1,d2	ΦD	L	L1	L2	F	M	tightening screw torque (N.M)
GIC-12xl8.5	2,3,4,5,6	12	18.5	0.55	1.3	2.5	M2.5	1
GIC-16xl6	3,4,5,6,6.35	16	16	0.55	1.4	3.18	M2.5	1
GIC-16x23	3,4,5,6,6.35	16	23	0.55	1.4	3.18	M2.5	1
GIC-19x23	3,4,5,6,6.35,7,8	19	23	0.55	1.4	3.18	M2.5	1
GIC-20x20	4,5,6,6.35,7,8,10	20	20	0.55	1.5	3.75	M2.5	1
GIC-20x26	4,5,6,6.35,7,8,10	20	26	0.55	1.5	3.75	M3	1.5
GIC-25x25	5,6,6.35,7,8,9,9.525,10,11,12	25	25	0.6	1.7	4.84	M3	1.5
GIC-25x31	5,6,6.35,7,8,9,9.525,10,11,12	25	31	0.6	1.8	4.46	M3	1.5
GIC-28.5x38	6,6.35,8,9,9.525,10,11,12,12.7,14	28.5	38	0.8	2.1	5.62	M4	2.5
GIC-32x32	8,9,9.525,10,11,12,12.7,14,15,16	32	32	0.8	2.3	6.07	M4	2.5
GIC-32x41	8,9,9.525,10,11,12,12.7,14,15,16	32	41	0.8	2.3	6.02	M4	2.5
GIC-38x41	8,9,9.525,10,11,12,14,15,16,17,18,19	38	41	0.8	2.7	5.32	M5	7
GIC-40x50	8,9,9.525,10,11,12,14,15,16,17,18,19,20	40	50	0.8	2.7	6.2	M5	7
GIC-40x56	8,10,11,12,12.7,14,15,16,17,18,19,20	40	56	0.8	2.7	8.5	M5	7
GIC-42x50	10,11,12,12.7,14,15,16,17,18,19,20,22,24	42	50	0.8	2.7	6.2	M5	7
GIC-50x50	10,12,12.7,14,15,16,17,18,19,20,22,24,25,28	50	50	0.8	2.9	7.22	M6	12
GIC-50x71	10,12,12.7,14,15,16,17,18,19,20,222425,28	50	71	0.8	3.3	8.5	M6	12

model parameter	Rated torque (N.M)*	allowable eccentricity (mm)*	allowable deflection angle (°)*	allowable axial deviation (mm)*	maximum speed rpm	static torsional stiffness (N.M/rad)	moment of inertia (Kg.M²)	Material of shaft sleeve	surface treatment	weight （g）
GIC-12xl8.5	0.5	0.1	2	±0.2	11000	60	7.6x10^-8	High strength aluminum alloy	Anodizing treatment	4.8
GIC-16xl6	0.5	0.1	2	±0.2	10000	80	2.4x10^-7			8
GIC-16x23	0.5	0.1	2	±0.2	9500	80	3.4x10^-7			9.3
GIC-19x23	1	0.1	2	±0.2	9500	80	3.4x10^-7			13
GIC-20x20	1	0.1	2	±0.2	10000	170	8.1x10^-7			14
GIC-20x26	1	0.1	2	±0.2	7600	170	9.1x10^-6			16.5
GIC-25x25	2	0.15	2	±0.2	6100	780	2.3x10^-6			26
GIC-25x31	2	0.15	2	±0.2	6100	380	2.6x10^-6			29
GIC-28.5x38	3	0.15	2	±0.2	5500	400	4.5x10^-6			51
GIC-32x32	4	0.15	2	±0.2	5000	1100	8.1x10^-6			56
GIC-32x41	4	0.15	2	±0.2	500	500	9.7x10^-6			65
GIC-38x41	6.5	0.2	2	±0.2	650	650	3.0xl0^-5			107
GIC-40x50	6.5	0.2	2	±0.2	600	650	3.0x10^-5			135
GIC-40x56	8	0.2	2	±0.2	800	800	3.3x10^-5			142
GIC-42x50	8.5	0.2	2	±0.2	800	850	3.3x10^-5			135
GIC-50x50	20	0.2	2	±0.2	1000	1000	9.0x10^-5			220
GIC-50x71	20	0.2	2	±0.2	1000	1000	9.0x10^-5			330